Lawn Sprinkles. What are Their Peculiarities and How to Choose One?
If you are thinking about how to water the lawn faster and more efficiently in your summer cottage, you will need an automatic watering system that works through built-in sprinklers. They come in several varieties and work in different ways, so if you want your lawn to be watered at the highest quality, it is recommended that you familiarize yourself with the information below.
Which type of lawn sprinkler do you need for your garden?
It is easier to choose sprinklers for your garden if you already know how the automatic irrigation system will be arranged. The first step is to prepare a sketch of the garden and mark the places where the sprinkler should spray water. This is important because some types of sprinklers can only water at one distance, while others can be used to water an unusually shaped garden.
The next step will be the direct selection of sprinklers, based on their parameters. And the first parameter that you need to pay attention to is the radius and shape of the spray.
Radius and shape of a watering. According to this parameter, sprinklers differ in 3 different models:
- Sprinklers that spray water in a circle. This is a classic sprinkler model. These can be sprinklers installed vertically and directing the water jet in one direction, or various types of rotating sprinklers, which, thanks to a rotating head, direct water in all directions at an angle of 360 degrees. When choosing sprinklers for irrigating a plot in a circle, keep in mind that these devices have different pressure and water pressure. By installing such a sprinkler next to delicate plants and flowers, you run the risk that they may be damaged by strong water pressure. Some models of sprinklers are capable of producing a jet of water with a radius of up to several tens of meters.
- Sprinklers that spray water in a certain square, or rectangle. Such sprinklers and sprinklers are also called oscillating and oscillating. They are also sometimes referred to as rain sprinklers because the jets of water produced by this type of sprinkler consist of droplets that resemble raindrops. The advantage of these models is that they even spray water over the entire area. This is especially convenient if you need to care for a large lawn of the correct form – it is enough to put 1-2 of these sprinklers in the center of the lawn.
- Sprinklers for watering areas of irregular shape. Triangular, oval, and other types of irregularly shaped lawns can only be sprayed with special variable geometry sprinklers. Such sprinklers are quite expensive, only a few manufacturers produce them, and their average irrigation efficiency is 3-4 acres of area.
Lawn type. Many homeowners choose sprinklers and sprinklers based on the area to be irrigated, completely forgetting that choosing the wrong type of sprinkler pressure can easily damage the lawn, flowers, and plants in the yard. So, for example.
High-pressure sprinklers are best used to irrigate lawns without delicate plants. Remember: the higher the “range” of the sprinkler, the higher the pressure of the released water – all this allows you to irrigate large areas at a time, but at the same time, such a strong jet of water can damage the grass on the lawn, leaves on trees or flowers on the site.
Rain sprinklers are considered a gentle way to irrigate a site. They do not carry the risk of damage to delicate plants and leaves. Of course, such sprinklers can consume a large amount of water and irrigate the same area for longer, but we can be sure that our lawn will not flood, and the plants will remain safe and sound.
Now you know all the peculiarities of choice for the lawn sprinklers. Now you need to get one. Just visit the Pondkeeper website and get it.
WANT TO RECEIVE PERSONAL, STYLISH SUGGESTIONS TO YOUR EMAIL?
FILL OUT THE FOLLOWING FORM: