Newbie To the Construction? Discover How to Choose the Right Trowel
During repair and finishing work, you cannot do without a trowel. Most often, it is an indispensable assistant when sealing seams, cracks, decorating surfaces, and eliminating of inequalities. When removing old coatings, a trowel will come in handy. These tools are used during the preparatory stage of finishing before the final one. However, there are many kinds that correspond to a different type of work. Read the article made by our team to distinguish the kind and purpose of the trowel.
If the trowel is made of iron and has only a shiny coating, then it will not be a very good helper in the work. Quality tools are made of stainless steel. Such instruments retain their shape, do not deform, they can be washed, cleaned. When choosing a trowel in the store, pay attention to the straight line of the blade, as well as the absence or presence of grease on it. If the grease is present, then it is a fake.
Main types of trowels
Trowels are divided into two large groups: facade and painting devices. Painter’s models should be ideal for interior decoration, removing surface defects, unevenness and roughness. Therefore, these instruments have a blade that exhibits little flexibility, which is noticeable when pressed against it.
The facade trowel is characterized by the presence of a strong handle, which has an enhanced adhesion to the trowel blade. The canvas, on the other hand, is particularly rigid. The facade trowel is suitable for plastering, facing facade surfaces.
If you are facing large-scale finishing work, then use trowels with a blade width of 20-25 cm. Narrow blades are not suitable, since they are used for the final leveling stage after working with a wide trowel or for sealing joints, and small cracks. When you start work, it is advisable to keep several instruments of different widths at hand.
There are also rubber trowels that are commonly used to putty small pieces of walls or ceilings, and to fill joints. They are great for sealant applications. Without fear of damaging the surface, you can remove the mortar from the tiles using rubber trowels.
When applying the composition to the tiles, notched trowels are used during installation. They are also suitable when removing old wallpaper. The tool allows you to give textured unevenness to the walls, create waves, eights, circles. When choosing a notched trowel, pay attention to the size of the teeth: it depends on the consistency of the mortar with which you have to work. The tool allows the composition to be applied evenly while saving the solution.
Characteristics to pay attention to
If you need a trowel together with a facade tool, then choose a model about 10 cm wide. The handle should be short and thick. This will avoid excessive elasticity when pressing, your hand will be less tired during work.
Look at the shape of the trowel, choose the one that will allow you to take the solution from the bucket without unnecessary scraping. Teardrop-shaped trowels will not work in this case. Consider the material of the blade. With two fingers, bend the canvas towards you without applying any extra effort. If at the slightest impact, the blade bends, then such a trowel will not work for you.
Hopefully, now all the fears are dismissed, and you are ready to start your work. The above models you may find by visiting the B&Q website. They have all the necessary instruments for proper construction work.
WANT TO RECEIVE PERSONAL, STYLISH SUGGESTIONS TO YOUR EMAIL?
FILL OUT THE FOLLOWING FORM: