How to Properly Take Care of Nail Gun?
There are several types of nail guns. They differ in drive types and fasteners. They all have their own purpose and application features. Regardless of the type of assembly gun, certain general rules for care and operation must be followed, which will significantly extend the service life of the tool. More about the rules read in the following article made by our team.
What to do to prolong the life of the tool?
According to safety rules, in each nail gun, the fasteners that are designed specifically for this particular device must be used. Otherwise, malfunctions are inevitable. For the same reason, the deterioration will also come much faster.
It so happens that the nail gun is out of order and needs to be repaired, then it is necessary to replace spare parts. It is best to use parts that are supplied by an authorized representative or the manufacturer itself. All repair work must be carried out by a specialist authorized by the manufacturer. In order for the tool to serve for a long time, you should not repair it yourself and use tools and accessories that are not intended for this purpose. In addition, it is forbidden to change the design of the device, since this can subsequently adversely affect not only the functioning of the nail gun but also create a dangerous situation during work.
When can damages happen?
Operational problems can occur due to improper use or failure of certain parts. For example, if the nail gun does not finish off the fasteners, then the cause may be the wear of the striker or piston ring. For any failures that occur during the workflow, the tool must be carefully inspected. If the cause of the failures could not be diagnosed on your own, then you need to contact the equipment repair specialists.
Separately, it should be said about pneumatic nail guns, for which the power source is compressed air. During operation, it is strictly forbidden to use flammable gases or oxygen as a source of energy. Connection of the tool is only allowed to those compressors in which the permissible pressure is not exceeded by more than 10%. If the pressure is higher, a restrictor valve must be used.
Another special feature in the maintenance of pneumatic nail guns is the removal of condensate that forms when compressed air is generated. Condensation is removed through a drain valve. However, this valve must be checked daily as even a small amount of moisture can cause corrosion inside the tool.
The maintenance of a nail gun is quite simple since the main thing is to comply with safety rules during operation, timely cleaning, and lubrication with oil. The device must not be thrown, ensure that no water gets into the nail gun. It is important to avoid all kinds of mechanical damage to the device. Careful application and competent handling of the tool will provide it with long and reliable service. If you are looking for such a helper visit the B&Q website.
WANT TO RECEIVE PERSONAL, STYLISH SUGGESTIONS TO YOUR EMAIL?
FILL OUT THE FOLLOWING FORM: