A Pond Pump. Essential Equipment to Keep Your Pond Clean

A Pond Pump. Essential Equipment to Keep Your Pond Clean

If earlier the house by the pond was a great happiness, now, if desired, a pond can appear at the house. The main thing is that there is a desire and a plot near the house or in the country. You can make it with your own hands of any shape and size, or by purchasing a pond mold. A personal reservoir, both an aesthetic decoration of the site, and a cozy relaxation area that will bring coolness on hot summer days. It is also possible to breed fish and plant aquatic plants. And today we will talk about a pump for a pond, which may be needed to purify water.

Why do you need a pond pump?

For garden ponds in the country, an electric pump is on a technical basis. Without a technical basis, the pond will sooner or later turn into a dirty puddle covered with green algae with a bad smell, and the smaller the size, the faster this will happen. To prevent this from happening, the reservoir must be provided with continuous operation of the pump with water filters, especially if it is the residence of fish. For fish, plants, and other living creatures, clear and clean water is the main condition for existence.

How to choose the right pond pump?

When choosing a pump, you need to consider performance and functionality. To do this, it is necessary to take into account all points and elements consuming water – streams, fountains, cascades, and waterfalls and estimate the required water flow. One pump may not be enough if there are a lot of consumption elements. Of course, it is possible to provide water access to all consumed water points with the help of special tees of complex wiring between the elements.

But it’s better to do it differently. Filtration systems and streams should function around the clock, but fountains can be turned off at night. By connecting them to different pumps, you can save on electricity.

Pumps for filtration systems have a special design. They freely pass particles of debris, algae, and soil, especially large particles are retained by the filter casing of the pump. Designed for continuous operation for many years. For the required level of filtration, the equipment must pass almost the entire volume of water in the reservoir or at least half of it per hour. So, for example, the performance of a pump for a pond of 2 m³ should be at least 1000 l / h.

How to install a pond pump?

Pumps are divided into two types:

  • Superficial.
  • Submersible.

When installing surface and submersible electric pumps, different approaches are used. Submersible models are installed almost at the bottom. Surface, placed on the shore of the reservoir. During installation, it is necessary to provide for the possibility of regular cleaning of the mechanism.

Most pond pumps are submersible. They are installed in the water, but not at the very bottom, but on a specially made stand to slow down the clogging of the pump filter. The stand can even be a brick or a purpose-built platform. When installing, it is important to provide a connection to the mains. The standard cable length is 10m. If necessary, the cable can be extended using adapters. A submersible pump for a pond in the country creates less noise than surface pumps.

The surface country pump for a pond is installed, as a rule, on land near a reservoir. Water is pumped using a water intake hose, which is lowered into the source.

If you want to create a pond for a paradise holiday on your site or realize the dream of fishing at home, then you cannot do without a pond pump. When choosing a technique, you need to consider performance and functionality. Find all the necessary filters in one place – Pondkeeper website.

WANT TO RECEIVE PERSONAL, STYLISH SUGGESTIONS TO YOUR EMAIL?

FILL OUT THE FOLLOWING FORM:

Please enter your email, so we can follow up with you.
http://glazed-lifestyle.com/privacy-policy/